 |
Bliss Calipers
Height Gauge
Micro Meters
Measuring Gauge
Gauge Block SetDial Caliper GaugeDial Bore GaugeDial IndicatorsSteel RulerCombination Square Sets
Hardness Testers
Surface Roughness Testers
Showcase View all our products / services as a slide show. 
|
|
Measuring Gauge
We manufacture all our products with accuracy and perfection. Our products are used for measurement purpose in various industrial and commercial sectors. The range includes products like combination square sets, steel ruler, dial caliper gauges, dial bore gauge, gauge block set, dial indicators etc. Apart from our regular range, we are also capable to offer customized products as per the requirements. Our products consists of- |
View Enquiry Basket
 | Gauge Block Set Features:- Made from high quality steel.
- Excellent wringability.
- Available in grade 2.
| Blocks per Set | Block included in Set | Grade | | 83 | 0.5mm (1 pc.); 1.0mm (1 pc.); 1.005mm (1 pc.) Step of
0.01mm : 1.01-1.49 (49 pcs.)
Step of 0.1mm : 1.5-1.9 (5 pcs.)
Step of 0.5mm : 2.0-9.5 (16 pcs.)
Step of 10mm : 10-100 (10 pcs.)
Step of 25mm : 25-100 (4 pcs.) | 2 | | 87 | Step of 0.001mm : 1.001-1.009 (9 pcs.)
Step of 0.01mm : 1.01-1.49 (49 pcs.)
Step of 0.5mm : 0.5-9.5 (19 pcs.)
Step of 10mm : 10-100 (10 pcs.) | 2 | | 112 | 1.0005mm (1 pc.)
Step of 0.001mm : 1.001-1.009 (9 pcs.)
Step of 0.01mm : 1.01-1.49 (49 pcs.)
Step of 0.5mm : 0.5-24.5 (49 pcs.) | 2 |
|
| Dial Caliper Gauge Features:- Hole size is obtained by measuring over the contact points with a micrometer.
- Gauge surface is half round with flat bottom, permits use in small or shallow holes, slots & grooves etc.
- Knurled knob at the end of the handle is used for size adjustments.
- Complete set of 4 gauges is supplied in a vinyl pouch.
| Range | Quantity | | 3-13mm | Set of 4 Pcs. |
|
| Dial Bore Gauge Features:
Special ceramic Tips Anvils for high accuracy
Provided with dial indicator 0.01-10mm.
New attactive Packing
Sizes Available:
18-35mm, 35-60 mm,50-150mm, 160-250 mm,250-450 mm |
| Dial Indicators Features:
Gears fit-tight for dependable accuracy and repeatability
Provided with 2 back plates( Lug back and flat back)
Metalised dial mechanism
Shock Proof
Provided in attractive packing
Accuracy 0.01 mm
Range Available:
0-10 mm, 0-25 mm |
| Steel Ruler Features:- Flexible steel rules.
- Matt finish.
- Front side:
- Upper Scale – 0.5mm,
1mm graduations Lower Scale – 1/16 ths, 1/32 nds,
1/64 ths graduations
Reverse side : Conversion table| Blocks per Set | Graduations | | Block included in Set | Grade | | 150mm/6 | 0.5mm,1mm | 1/16 ths, 1/32 nds, 1/64 ths |
| 300mm/12 | 0.5mm, 1mm | 1/16 ths, 1/32 nds, 1/64 ths | | 600mm/24 | 0.5mm, 1mm | 1/16 ths, 1/32 nds, 1/64 ths | | 1,000mm/40 | 0.5mm, 1mm | 1/16 ths, 1/32 nds, 1/64 ths | | 1,200mm/48 | 0.5mm, 1mm | 1/16 ths, 1/32 nds, 1/64 ths | | 2,000mm/80 | 0.5mm, 1mm | 1/16 ths, 1/32 nds, 1/64 ths |
|
| Combination Square Sets Features:- Three measuring heads are attached to the stainless steel rule(blade) allowing versatile measurements on various types of work pieces
- Square head used to set the rule at 90° or 45° to an edge of a work piece
Center head used to locate centers of round work pieces Protractor head used to set rule at a desired angle to an edge of a work piece. Also used for measuring angles
- The measuring heads are hardened
| Size | Remarks | | 300mm/12'' | With Blade, Square Head, Center Head &Protractor Head | | 600mm/24'' | With Blade, Square Head, Center Head & Protractor Head |
|
|
 |
Copyright© Ghanshamdas & Sons, All Rights Reserved (Terms of Use)
